There are so many amazing benefits to using CCT colour temperature adjustable lighting products. They completely transform a space, change the mood in a room immediately and have fantastic health benefits (read our blog for more details).
But are they difficult to set up and use? No, they’re not! They’re actually incredibly easy to set up.
Here is a step by step guide to setting up your own CCT colour temperature LED tape.
Step 1
Make sure you have all the necessary components. These are:
Your CCT tape
A CCT remote control
A receiver
A driver (for help calculating which driver you need, please read our blog)
Step 2
Plug your receiver into your driver using the male to female connectors

Step 3
Plug your LED tape into your receiver using the 4-way distribution block
Step 4
Open the hatch at the end of your receiver. If you are installing lighting into one zone, please ensure that both the pins are covered by the jack on the master LED controller.

Step 5
Switch the CCT remote control on
Step 6
Press the learning key on the receiver
Step 7
Press and hold the zone that you wish to set up on your remote control until the LED tape flashes. Ones this happens the zone is now programmed.
Setting up a scene
Step 1
Turn the remote control on
Step 2
Set the colour temperature and brightness you wish
Step 3
Select the scene you wish to set this colour temperature to and press and hold the button until the light flashes
Step 4
Repeat this process across all the scenes. Once they are all programmed in the remote control will remember these and you can switch your lighting between the scenes as you please.
If you would like to watch this process being completed, please watch our how to video:
Follow us on social media for more content…
Twitter: https://twitter.com/tlw_est1996
Instagram: https://www.instagram.com/tlwglobal/